Hot Water Systems

Gas Hot Water Systems

Gas is still one of the cheapest ways to heat water in Sydney — if you pick the right type. Here's storage versus continuous flow, what each costs to run, the brands we trust, and how we supply and install.

Is gas right for you

Where a gas hot water system makes sense

A gas hot water system heats water with a gas burner rather than an electric element — and because gas is usually cheaper per unit of energy than peak electricity, it's a strong choice for homes on natural gas, especially larger households that use a lot of hot water.

There are two very different kinds of gas system, and choosing between them is the main decision: a gas storage system keeps a tank of water hot and ready, while a continuous flow (instantaneous) system heats water on demand as you use it. They suit different homes, and they cost different amounts to buy and run.

Gas continuous flow hot water system mounted on the exterior wall of a Sydney home
The main decision

Gas storage vs continuous flow

Both run on gas, but they behave very differently. This is the choice that shapes your price and your running cost.

Gas storage

  • Keeps a tank (commonly 90–170L) hot and ready, so you get a big burst of hot water instantly.
  • Lower upfront price and simple to install as a swap.
  • Some heat is lost from the tank standing by, so it's a little more to run than continuous flow.
  • Best where you want a straightforward, lower-cost replacement.

Gas continuous flow

  • Heats water on demand — endless hot water and nothing wasted keeping a tank warm.
  • Compact, wall-mounted, and frees up space.
  • Costs a bit more upfront but less to run, and never runs out.
  • Best for most homes, and for anyone who's run out of hot water mid-shower.
Comparison of a gas storage tank beside a compact wall-mounted continuous flow unit
Storage gives you a ready tank; continuous flow heats on demand and never runs out.
What matters

Running costs, sizing and the brands we install

Three things decide which gas system you end up with — and we walk you through all three before you buy.

Running costs

Gas continuous flow is typically cheaper to run than gas storage because it wastes no heat standing by. Both are usually cheaper to run than a standard electric element system. We'll give you an honest view of the running cost for your household.

Sizing

A storage system is sized by tank volume and household size; a continuous flow unit is sized by flow rate (litres per minute) and how many bathrooms you run at once. Get this wrong and you run out — getting it right is part of our quote.

The brands

We supply and install the proven gas brands — Rinnai, Rheem and Dux among them. We'll recommend the model that fits your home and budget rather than whatever's on the shelf.

At a glance

Gas storage vs continuous flow

A quick side-by-side — we confirm the exact price for your home on site.

Gas storageGas continuous flow
Hot waterA ready tankful, then recoversEndless, on demand
Upfront priceLowerA little higher
Running costSlightly higher (standing loss)Lower (no standing loss)
SpaceFloor-standing tankCompact, wall-mounted
Best forSimple lower-cost swapsMost homes; never running out
Supply & install

We supply and install — Sydney-wide

One team, quote to hot water.

We're a supply-and-install service, not a shop: we help you choose the right gas hot water system, supply it, and install it to code — tempering valve and all — then take the old unit away. You deal with one team from quote to hot water, and we come to you anywhere across Sydney.

Because the right system depends on your gas supply, your current setup and how much hot water you use, we quote on what we can see. Tell us your situation and we'll give you an itemised price — the gas hot water system price, the install, and any site-specific extras, shown separately so you know exactly what you're paying for.

If you're leaning toward endless hot water and a lower running cost, the continuous flow range is where most people land — have a look at instant gas, or let us recommend the right fit.

Licensed plumber and gasfitter installing a gas hot water system at a Sydney property
Supplied and installed to code by licensed plumbers and gasfitters — we come to you.
FAQ

Gas hot water questions, answered

The questions we're asked most when people choose a gas system.

Should I get gas storage or continuous flow?
For most homes, continuous flow — it gives endless hot water, costs less to run, and frees up space. Gas storage is the lower-upfront choice for a simple swap. We'll recommend the right one for how your household uses hot water.
What size gas hot water system do I need?
A storage system is sized by tank volume and the number of people; a continuous flow unit is sized by flow rate and how many bathrooms you run at once. We size it as part of the quote so you don't run out — or overpay for more than you need.
How long does a gas hot water system last?
A well-maintained gas system typically lasts around 10–12 years for storage and often longer for a quality continuous flow unit. Regular servicing and the right water pressure help it reach the top of that range.
Is gas cheaper to run than electric?
Gas is usually cheaper to run than a standard electric element system, and continuous flow gas wastes no heat standing by. A heat pump can be cheaper again to run — we'll give you an honest comparison for your home.
What does a gas hot water system cost installed?
It depends on the type, the size and your site — gas supply, position and any extra pipework. We quote the gas hot water system price and the installation separately and itemise any extras, so there are no surprises.
Do you supply and install, or just install?
Both. We help you choose the system, supply it, install it to code with the required valves, and remove the old unit. One team from quote to hot water, Sydney-wide.
Can you install a gas system where I don't have one now?
Usually yes, where there's a gas supply we can connect to. We'll assess your gas and the position on site and quote the full job, including any new pipework or flue requirements.
Ready for reliable gas hot water?

Get a gas hot water quote

Tell us your setup and we'll recommend the right gas system, supply it and install it to code — itemised pricing, Sydney-wide, and we come to you.

Call 1300 096 668