If you are looking to upgrade and replace an old, inefficient hot water system supply with a new one, you have come to the right place. Replacing your old hot water system can save you money on your energy bills and be better for the environment. It’s not always easy to know which system is right for your home, and the process of installation can also get really confusing. At Sydney Hot Water Systems, we are hot water service supply and installation experts, with years of experience, we are able to provide prompt service at reasonable installation pricing. With our help, your home will have its hot water installed in no time. We have made the process much easier and more convenient for you by supplying the very best brands and a simple installation process. Here are some tips to help you choose the right system for your needs.
How Much Hot Water Does Your House Require?
Estimate how much hot water your household requires. There are various factors that will determine the capacity of the system you will need, including the family size and lifestyle habits like whether or not they take long showers or run the dishwasher regularly. It’s also good to consider other appliances that may require large amounts of hot water. If you have more than one hot water system in the house, you may need to consider adding another.
Gas, Electric, Solar, or Heat Pump?
Determining whether your home requires gas or an electric hot water system is the first thing you need to do and this will largely depend on where your home is located.
Gas
Gas hot water systems work by water being heated by a gas storage burner as it flows through a coiled pipe called a heat exchanger. The gas burner starts when a hot water tap is turned on.
Natural gas is a good choice if you have a connection to it. It’s cheaper than electricity and because gas rates don’t vary through the day, gas-hot water systems can heat water as needed. Installation typically takes no more than two or three hours if it’s a replacement for a similar system.
Electric
Electric storage hot water systems work similarly to natural gas storage systems. Coldwater is piped into the tank where it is heated, then it rises to the top and is siphoned off when the hot tap is turned on. The difference is in where the heating occurs.
An electrically heated storage tank system is normally relatively cheap to buy and install but usually has higher running costs. Installation commonly takes no more than two or three hours, if it’s a replacement for a similar system.
Solar
Solar hot water systems are becoming more and more popular because they are a great way to save money on your energy bills. And solar water heating uses the sun’s natural energy to heat up water, which is then stored in a tank for use. Not only does this save you money on your energy bills, but it’s also a great way to reduce your carbon footprint.
Heat Pump
A heat pump water system is similar to a solar water heating system, but it uses electricity to run instead of the sun’s rays. This means that it can be used even on cloudy days or in cold climates. Heat pump water systems are a great way to save money on your energy bills and are a more environmentally-friendly option than gas or electric systems.
The Benefits of Upgrading to a New Hot Water System
An old hot water unit may not function optimally as it once used to, resulting in substandard service. When you upgrade to a new hot water system, your old system will still be operational, so the risk of service interruptions is minimal. Your new hot water installation can also reduce energy costs by up to 70%. It may also boost the value of your home because it helps put off expensive repairs and replacements for years to come.
Save Money In The Long Run
Replacing an old hot water system also reduces greenhouse gas emissions and is more environmentally friendly. With a modern system, you can choose from a range of efficient models that comply with environmental standards and the latest energy efficiency regulations of Australia. A new hot water system may require less maintenance compared to your older model so it saves you money on service costs.
How Sydney Hot Water Systems Can Help You
We offer a range of hot water system solutions to suit any budget and space. When you contact us, we’ll ask a range of questions about your current system as well as your needs and requirements before recommending the right hot water system for you. Choosing the right hot water system for your home is easier than you think with Sydney Hot Water Systems. We have installed thousands of systems in many different homes, which means we are confident to recommend the best product for your needs and budget. Also, we can handle all aspects of installation, including drawings (if needed), plumbing, gas fitting, electrical work and ventilation.
Same Day Installation
We guarantee quick service, so if you want a speedy installation or replacement of your hot water system, we can help. We offer same-day installation throughout Sydney and the surrounding suburbs.
Equip, Install and Repair
Our services also include installation, repair and replacement of plumbing and gas fittings. If your current water system needs hot water repairs rather than a whole new upgrade, we can arrange that for you.
Brands We Work With:
Sydney hot water systems supply many different types of hot water systems.
Aquamax
AquaMAX is a major manufacturer of domestic water heaters for the Australian market. Since the company’s establishment in 1988, AquaMAX has committed to providing Australians with highly efficient Electric Storage and 5 stars rated Gas products.
Dux
An iconic Australian brand since 1915, the Dux range has seen continuous research and development, resulting in many breakthroughs in the efficiency, reliability, and longevity of hot water systems.
EvoHeat
EvoHeat is an industry specialist in heat pump technology. With over 15 years of experience in providing energy-efficient heating and cooling solutions, they are the largest and most experienced Australian supplier of heat pump technology.
Rheem
Rheem hot water systems have been widely admired for decades… right back to 1939. The thread that has maintained this trust is their level of innovation and invention: they don’t simply make functioning water heaters; they make them work beautifully.
Rinnai
In the early 90s Rinnai forever changed the way Australians enjoyed hot water, with our launch of the country’s first fully electronic gas continuous flow hot water systems. It was a revolutionary leap that provided total confidence and comfort by knowing that your hot water would never run out.
Thermann
Thermann hot water is a 100% Australian-owned brand committed to the highest quality manufacturing standards to meet the demands of the modern-day household.
Contact Us Today
No matter what brand of hot water system you choose, Sydney Hot Water Systems can help you install it quickly and professionally. We have a wide range of systems available to meet any budget or space requirement, and we offer same-day installation throughout Sydney and the surrounding suburbs. If you need repairs rather than a full replacement, we can handle that too. Contact us today for more information about our services or to get a free quote.